Most commercial roofs are flat and designed by respecting the type of structure, thermal insulation – waterproofing technology and the operating conditions depending on each roof. These factors determine the life span of the roof.
Currently, the best material for a commercial roof is considered the EPDM membrane.
EPDM rubber products for construction were developed in the late 1950s. The climate in the Middle East required a roofing material able to withstand it. The material had to be very flexible and remain stable even in temperatures variations between -45 and + 120 °C. EPDM rubber proved to be a very suitable product for this market.
Ethylene Propylene Dien Monomer is a synthetic rubber, very resistant to UV, ozone and other atmospheric influences. In addition, it is known for its great, permanent flexibility. The material has proved its efficiency for more than 50 years, and is used by commercial roofing Colorado Springs CO flat roofing specialists as a waterproofing material for flat roofs and other architectural or non-architectural applications.
The characteristics of natural rubber could not be adapted or manipulated. However, with a synthetic rubber product, scientists can select, adapt and modify the basic products to determine the molecular structure, thus allowing them to design the construction of polymers. The result allows EPDM synthetic rubber to adapt precisely to its specific uses and requirements.
Incorrectly installed holiday decorations are among the most common culprits for roof damage – the pins and clips that are not suitable for being used on roofs can puncture the roofing surface and decorations that are not suitable for being used on roofs pose a fire hazard.
However, the holidays cannot be complete without lights, so here is how to hand your lights safely and correctly on your commercial roof:
- Use light strings intended for being used outdoors – these products are safe to be kept outdoors even when it is snowing and you don’t need to worry about leaving them turned on for longer periods;
- Use clips and tape intended for being used on roofs – commercial roofing Colorado Springs CO technicians emphasize that you should replace traditional nails and metal clips with plastic clips or tape designed to be used on roofs. These special fasteners do not damage the surface that they are attached to, so they are safe to use;
- Attach your lights to the edge of the roof – do not install lights on the roof surface, clipping or taping them to roof edge or to the edge of the gutter ensures much more safety for the lights as well as to the structure that the lights strings are fastened to.
Imagine neglecting your roof this fall to save money. While the initial initiative might seem good in the short run, and during the winter you might not have to deal with issues such as excessive rainfall, once the spring comes you might realize that the problem has come back to haunt you. The damaged roof could now have more leaks than ever, and the internal structure might also be plagued with mold and mildew, requiring extensive repairs that could cost you thousands of dollars.
Instead of that, it might be best to have your roof inspected in advance and make sure that you can repair at least some of the issues to prevent them from getting worse as the weather gets harsher. Leaks can be fixed with just a couple of hundred dollars, and you can also clean and fortify your roof against future damage. Special coatings are available that can keep flat roofing systems protected and improve on their energy efficiency. Set up a time to have positively reviewed commercial roofing Colorado Springs CO contractors inspect your roof and complete necessary repairs before the colder weather hits.
In the process, as you apply all the necessary preventive repairs and maintenance work, you might also notice that your roof has become more efficient in retaining its thermal resistance. This means that throughout the winter you’ll have to deal with far fewer issues with your heating system and even save a lot of money that would otherwise be required to adequately heat your building.
The roofs on commercial buildings are built using resistant, durable materials, but even these materials need protection, especially in climate areas that get extreme summers, with high heat, extended dry spells or rainy periods. Here is how to give your roof the protection it needs:
- Inspect and maintain the roof before and after summer – regular roof inspections are the best way to detect any roof issues that need repair before they turn into severe issues. The inspection should be followed by roof cleaning to remove any debris from the roof surface and to prevent exposure to excessive moisture. Commercial roofing Colorado Springs CO representatives support that the process should also include the inspection, the cleaning and the repair of the gutters and the downspouts – the drainage system is especially important for flat commercial roof that are very sensitive to any exposure to water that is not drained by the gutters;
- Protection with coatings – roof coatings are paint-like chemicals that provide extra protection to roofing materials. Some coatings prevent overheating by enhancing the roof’s reflective properties, others provide protection from harmful UV rays and there are products that sealing the surface of the roof and enhancing its water resistance. Whatever the purpose of the coating process, the protective layer needs to be refreshed regularly, at the intervals specified in the instructions of the coating product of choice.
Hail storms happen quite rarely – fortunately! – and they may not seem the worst weather phenomena, but those who witnessed a severe hailstorm probably know the kind of long-lasting damage it can cause.
When it comes to a roof, hail damage is dangerous even if it is barely visible, because it creates vulnerabilities that will aggravate sooner or later. As such, it is extremely important to identify hail damage on your roof, so you must perform an inspection once a hail storm passes by.
Like we said before, hail damage may not be easy to identify, especially on certain roofing materials, so a visual inspection from the ground is not enough. The person who inspects the roof must climb it to be able to observe potential damage. If you do not feel safe climbing your roof or do not have protective equipment to prevent you from falling and injure yourself, you should contact a Colorado Springs professional roofer. This is always the best option and not only for safety reasons. A hail damage commercial roofing Colorado Springs CO expert knows exactly what to look for, not to mention that its written report will be useful if you make an insurance claim.
Hail damage looks different on different roofing materials. Generally, keep an eye on any small impact areas – chips, dents, tiny craters, scratched pain etc. Additionally, look for damage on windows, doors, vehicles, because if they have hail damage, your roof will most likely have hail damage too.
Roofing contractors come in all shapes and sizes, and while some of them specialize in installing roofs and getting the most difficult jobs done for large businesses, others work more in the residential roofing industry, and are better suited to dealing with the needs of homeowners.
Depending on your needs, it’s important to consider hiring a Colorado Springs roofer with more experience, and for companies owning large commercial buildings, this consideration is extremely crucial. If you don’t want your roof to keep leaking or your roof repair expenses to keep increasing over the next few months, it’s very important to seek out a highly skilled and experienced commercial roofer, instead of hiring a general contractor.
While general contractors are great for small time repairs and managing residential projects, a large commercial project requires the presence of a top notch commercial roofing Colorado Springs CO professional because there is far less margin for error. A commercial roofing expert will be able to guide you through all the various details, and help you figure out what the best course of action is even in dealing with custom roofing projects.
If you don’t want any slip-ups, and you are truly committed to improving the condition of your roof, while even enhancing your building’s energy efficiency, appeal and maintenance-free operations, consider calling your local commercial contractors today to establish a meeting.
In Colorado, roofing contractors are included in the general contractors’ class. For this reason, they are not required to provide a state license but a business license. The main purpose of this license is to show that the company has been active for at least 2 years and it is issued by two Colorado municipalities.
It is the evidence of passing a nationally recognized examination that allows the roofing contractor to work on residential and commercial property. But, even though the state of Colorado doesn’t require a special roofing contractor’s license, it doesn’t mean that a good roofing contractor shouldn’t have some qualifications.
Licensed commercial roofing Colorado Springs CO contractors work should be based on a legally binding contract, which should include the total payment that he claims for his services. A typical Colorado contract also requires to mention the materials to be provided and the type of work that is about to be made, the working the length of time and the cost for any eventual damages or the liability coverage insurer.
Remember that a licensed roofing contractor should never ask for payment in advance for work or materials. Anyway, the contract that you sign should contain a policy regarding the construction cancellation and the refund procedure.
Commercial roof insulation refers to the layer installed under the roof membrane to protect the interior of a building from outside elements. The purpose of roof insulation is to limit any thermal transfers between the outside and the inside of a building. This can be achieved both through using certain non-conductive materials, and by using certain special techniques.
This issue is more poignant in areas where there are important temperature fluctuations from season to season. In this case, preparation in advance becomes essential.
Skilled commercial roofing Colorado Springs CO contractors should be able to recommend the best type of roof insulation materials for your commercial building. Such materials may include: cellulose, foam board, spray foam, mineral wool, fiberglass, and so on. Cellulose is the most affordable option. Also, if is treated with boric acid, it can protect the roof from unwanted insects. It is also mold and fire resistant.
If the work is done properly, roof insulation should last for 80 years (in case of spray foam insulation, for example) or 100 years (in case of wool). At the same time, roof insulation can help you save up to 25% of your energy bills.
Each option has its very own advantages, that can be explained to you by skilled professionals.
Class A, B, or C represents fire ratings for roofing materials but some materials are simply unrated if a roof covering cannot meet the requirements to be included in any class.
The highest rating is Class A, which means that it includes the materials creating the most fire resistant roofs: metal roofs, concrete tiles, clay tiles, slate roofing and fiberglass asphalt composition shingles. These materials require no special treatments to be rated Class A. However, some of them are very heavy (slate, clay, concrete) and in some severe cases, if the fire progresses too much, fire fighters may not be allowed to intervene, because if such a heavy roof collapses on them it can produce another disaster.
Other materials are rated Class A only if additional materials are used to increase protection and attain the fire rating: aluminum, rubber or recycled plastic products.
On the other hand, traditional wood shakes that are not treated with any fire retardant are an example of unrated material. Wood shakes that are impregnated with such a solution can meet the requirements for being rated Class B.
Class A fire rated roofing materials are a great choice especially if the building is located in a wildfire-prone area.
Talk to fire resistant commercial roofing Colorado Springs CO companies for the latest information on fire resistant roofing. They will be the best resource in understanding your options.
To find out what commercial roof materials will work best for your building, you can count on the expert advice of commercial roofing Colorado Springs CO professionals.
Commercial TPO Membrane
Thermoplastic polyolefin is a new-generation of flat roof materials, which was used for the first time in 1986 and created as a more cost-effective alternative to PVC membranes.
Nowadays, it is one of the most popular single-ply membranes used to seal commercial roofs, because of the cheaper upfront costs and its characteristics that make it a good choice: flexibility, durability, lightweight, reflectivity and recyclability.
Commercial EPDM Membrane
Ethylene propylene diene methylene membrane – this is its full name. This rubber membrane has proved its efficiency during the 60 years since it is in the market. It can form-fit any roof due to being easy to stretch, it is durable and also a great choice for cooler climates, considering its darker color that absorbs heat.
EPDM membrane is the no1 material in flat commercial roofing nationwide.
Commercial PVC Membrane
Polyvinyl chloride membrane is also popular and time-tested. Its most significant advantages include durability, fire retardant properties, longevity (which also makes it cost-effective), great resistance to puncture, tear and moisture.
Metal flat roofing
Metal is an effective material, used successfully on any type of roofs. Commercial flat roofing is durable, reflective and lightweight, and can be installed fast and easy, considering that it mostly comes in large sheets.